HARDWARE

ASRock FM2A85X Extreme6 Socket FM2 Mainboard Review (Part 4)

6/24/2013 11:51:06 AM

When being in the idle mode, the CPU frequency multiplier is still reduced to x14 but its voltage remains unchanged. We knew that the MSI mainboard for Intel’s CPU cannot be overclocked without the power-saving technology being disabled, and we just found out that EVGA mainboard also behaves in just the same way, but we do not hope that ASRock mainboard for AMD Socket FM2 CPU would join that list. If it were, it would be a shame indeed.

Wrapping up our ASRock X-Boost technology description, we can tell that it is turned off easily just by pressing the ‘D’ key while booting your system – you will see a note on the startup screen.

Press ‘D’ key when booting your system to turn the ASRock X-Boost off

Press ‘D’ key when booting your system to turn the ASRock X-Boost off

We have noted in our review that it is very quick to boot a modern mainboard, so you have to be as quick to press the key to access their BIOS. That is the reason why some manufacturers come to the idea of creating a special button for accessing into the BIOS automatically. Another option is that you can enable a startup delay in BIOS options. For example, The Setup Prompt Timeout in FM2A85X Extreme6’s BIOS is able to point out a pause before the mainboard processes to start the system. BIOS cannot be launched by pressing any dedicated button in ASRock mainboard, but this mainboard does offer a Restart to UEFI utility. The hardware solution is usually considered as ore possible than software one, but not in this case. Pressing a button on the PCB is just easy as accessing into the mainboard, but when it locates inside the computer case, it would not be that easy. The software utility, in contrast, is easy to access. It is small and simple as there are just two switches and one button on its window. One switch is for launching the BIOS interface on the next system startup screen automatically. It can also be used to reverse your decision. The other one is for rebooting the system immediately when the button is for applying your choice.

The Restart to UEFI utility

The Restart to UEFI utility

The Restart to UEFI utility was used quite often in our tests of the ASRock FM2A85X Extreme 6 mainboard. It is tremendously convenient and we really wish that it could also support other manufacturers’ mainboards. We hope that such utility would be provided in other manufacturers’ mainboards regardless of whether there is a BIOS button or not on the hardware. It would be unbelievably convenient to have two different ways of accessing into the mainboard’s BIOS.

Going on with our discussion about the overclocking ability and configuration of the mainboard, we can tell that it is perfect in terms of breaking the clock rate of the CPU-integrated graphics core. Like the ASUS F2A85-V PRO, the ASRock FM2A85X Extreme6 provides the real clock rate values. The process is different on the Gigabyte GA-F2A85X on which any value can be chosen as the BIOS offers 1 MHz increment, but the clock rate generator sets a variable clock rate, so you have to use the trial-and-error method to find out the right value. The CPU overclocking has been already discussed above. It seems strange that the CPU frequency multiplier does not decrease even when you use the auto overclocking function, but it is still pity that the fact of losing the Cool’n’Quiet technology is inevitable.

The memory sub-system settings are also not very impressive. The memory modules’ SPD information seems to be first displayed on the MSI mainboards in the BIOS interface but other manufacturers have now offered the same capability. It is not very important to know who the first mover of this function is, because the implement is not much different: memory timings are all adjusted in a single section of BIOS, while the recommended values are displayed in another section. The ASRock FM2A85X Extreme6, in contrast, shows SPD information in the same section, where you can freely modify your memory timings. Therefore, based on the chosen frequency, the right timings can be easily set, referencing the memory maker’s recommendations. It seems to be so simple and logical implementations, so it is strange that nobody thought of this obvious approach before.

However, the memory settings adjustments process does have a drawback, and it might be more obvious in reality than it seems at the first glance. Every mainboard is able to set the memory timings automatically since it has to be successful right at the first time. If difference just increase when you try to change those timings. The easiest way is to choose Auto by default for all parameters. In this case, it is also possible to change some timing and set default for the rest. Unfortunately, in some mainboards, if you manually change at least one parameter, you would have to do the same way for each of the others. Opposite to most of the mainboards, including the ASRock mainboard for Intel’s CPU, you have to set all parameter of the ASRock FM2A85X Extreme6 mainboard manually as it does not have any Auto value. The mainboard is able to configure them automatically, but only after the additional restart. Let we explain this with some examples. First of all, we open the DRAM Timing Control page and see many parameters on the left. Then, there is a column showing its current values and you can set up values that you wish to be applied after the restart process.

Setting each timing manually as it does not have any Auto value

Setting each timing manually as it does not have any Auto value

Therefore, the 1,333MHz memory frequency has been changed to 1,867 MHz. If we did it manually or by loading a XMP configuration, it would not cause any problem. In the latter case, we set the time by default, but the Command Rate was changed from 2T to 1T. However, we still see the 1,333MHz memory frequency when accessing into the DRAM Timing Control. If you chose 1T for the Command Rate, the mainboard would not be able to start up or booting the OS since the timing is not appropriate for 1,867MHz. Therefore we had to restart the mainboard, signing in to the BIOS again and came to the DRAM Timing Control to get the exact timing, and just then were we able to change something.

If you chose 1T for the Command Rate, the mainboard would not be able to start up or booting the OS

If you chose 1T for the Command Rate, the mainboard would not be able to start up or booting the OS

 

Other  
 
Top 10
Review : Sigma 24mm f/1.4 DG HSM Art
Review : Canon EF11-24mm f/4L USM
Review : Creative Sound Blaster Roar 2
Review : Philips Fidelio M2L
Review : Alienware 17 - Dell's Alienware laptops
Review Smartwatch : Wellograph
Review : Xiaomi Redmi 2
Extending LINQ to Objects : Writing a Single Element Operator (part 2) - Building the RandomElement Operator
Extending LINQ to Objects : Writing a Single Element Operator (part 1) - Building Our Own Last Operator
3 Tips for Maintaining Your Cell Phone Battery (part 2) - Discharge Smart, Use Smart
REVIEW
- First look: Apple Watch

- 3 Tips for Maintaining Your Cell Phone Battery (part 1)

- 3 Tips for Maintaining Your Cell Phone Battery (part 2)
VIDEO TUTORIAL
- How to create your first Swimlane Diagram or Cross-Functional Flowchart Diagram by using Microsoft Visio 2010 (Part 1)

- How to create your first Swimlane Diagram or Cross-Functional Flowchart Diagram by using Microsoft Visio 2010 (Part 2)

- How to create your first Swimlane Diagram or Cross-Functional Flowchart Diagram by using Microsoft Visio 2010 (Part 3)
Popular Tags
Microsoft Access Microsoft Excel Microsoft OneNote Microsoft PowerPoint Microsoft Project Microsoft Visio Microsoft Word Active Directory Biztalk Exchange Server Microsoft LynC Server Microsoft Dynamic Sharepoint Sql Server Windows Server 2008 Windows Server 2012 Windows 7 Windows 8 Adobe Indesign Adobe Flash Professional Dreamweaver Adobe Illustrator Adobe After Effects Adobe Photoshop Adobe Fireworks Adobe Flash Catalyst Corel Painter X CorelDRAW X5 CorelDraw 10 QuarkXPress 8 windows Phone 7 windows Phone 8